Visite também: Currículo ·  Efetividade BR-Mac

O que é LinuxDownload LinuxApostila LinuxEnviar notícia


Mensagens do boot do mini-note HP 2133, atendendo a pedido

Nos comentários de uma notícia recente sobre o mini-notebook HP 2133, que a HP agora confirma que lançará oficialmente no Brasil, o leitor que assina como john doe me pediu que encaminhasse aos amigos do Zumo, que instalaram o Linux em um HP 2133 cedido pela empresa, a solicitação de uma cópia da saída do comando dmesg mostrando as mensagens registradas durante a inicialização.

Encaminhei, eles testaram, atenderam, e responderam, adiantando que é provável que tenhamos ainda esta semana mais novidades sobre a vinda oficial do micrinho para o Brasil. Obrigado!

Saiba mais (en.wikipedia.org).

Segue o dmesg:

zumo@zumo-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 – 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 – 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 – 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 – 0000000037eb0000 (usable)
[ 0.000000] BIOS-e820: 0000000037eb0000 – 0000000037ebe000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037ebe000 – 0000000037ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ef0000 – 0000000037f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 – 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 – 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 – 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 – 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 894MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 229040) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229040
[ 0.000000] HighMem 229040 -> 229040
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 229040
[ 0.000000] On node 0 totalpages: 229040
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1757 pages used for memmap
[ 0.000000] Normal zone: 223187 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F9EB0 checksum 0
[ 0.000000] ACPI: RSDP 000F9EB0, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 37EB0100, 0064 (r1 HPQOEM SLIC-MPC 20080402 MSFT 97)
[ 0.000000] ACPI: FACP 37EB0290, 00F4 (r4 HP FACP0956 20080402 MSFT 97)
[ 0.000000] ACPI: DSDT 37EB0600, 906B (r2 68VGU 68VGUF02 F02 INTL 20061109)
[ 0.000000] ACPI: FACS 37EBE000, 0040
[ 0.000000] ACPI: APIC 37EB0390, 0060 (r2 HP APIC0956 20080402 MSFT 97)
[ 0.000000] ACPI: MCFG 37EB03F0, 003C (r1 HP OEMMCFG 20080402 MSFT 97)
[ 0.000000] ACPI: SLIC 37EB0430, 0176 (r1 HPQOEM SLIC-MPC 20080402 MSFT 97)
[ 0.000000] ACPI: WDRT 37EB05B0, 0047 (r1 HP VT-8237S 20080402 MSFT 97)
[ 0.000000] ACPI: OEMB 37EBE040, 00F0 (r1 HP OEMB0956 20080402 MSFT 97)
[ 0.000000] ACPI: HPET 37EB9670, 0038 (r1 HP VT-8237S 20080402 MSFT 97)
[ 0.000000] ACPI: SSDT 37EBE130, 02AE (r1 HP P001PM 1 INTL 20051117)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0×808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] ACPI: HPET id: 0×11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 37f00000:c6d00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 – 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 – 00000000000e3000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e3000 – 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227251
[ 0.000000] Kernel command line: root=UUID=428416B68416AC83 loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore… done.
[ 0.000000] Enabling unmasked SIMD FPU exception support… done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1197.079 MHz processor.
[ 23.253385] Console: colour VGA+ 80×25
[ 23.253392] console [tty0] enabled
[ 23.253973] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 23.255203] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 23.307616] Memory: 896132k/916160k available (2176k kernel code, 19388k reserved, 1006k data, 368k init, 0k highmem)
[ 23.307641] virtual kernel memory layout:
[ 23.307644] fixmap : 0xfff4b000 – 0xfffff000 ( 720 kB)
[ 23.307648] pkmap : 0xff800000 – 0xffc00000 (4096 kB)
[ 23.307652] vmalloc : 0xf8800000 – 0xff7fe000 ( 111 MB)
[ 23.307656] lowmem : 0xc0000000 – 0xf7eb0000 ( 894 MB)
[ 23.307660] .init : 0xc0421000 – 0xc047d000 ( 368 kB)
[ 23.307664] .data : 0xc03201f4 – 0xc041bdc4 (1006 kB)
[ 23.307668] .text : 0xc0100000 – 0xc03201f4 (2176 kB)
[ 23.307678] Checking if this processor honours the WP bit even in supervisor mode… Ok.
[ 23.307757] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 23.307971] hpet clockevent registered
[ 23.387931] Calibrating delay using timer specific routine.. 2396.00 BogoMIPS (lpj=4792007)
[ 23.387971] Security Framework initialized
[ 23.387983] SELinux: Disabled at boot.
[ 23.388022] AppArmor: AppArmor initialized
[ 23.388033] Failure registering capabilities with primary security module.
[ 23.388051] Mount-cache hash table entries: 512
[ 23.388242] Initializing cgroup subsys ns
[ 23.388251] Initializing cgroup subsys cpuacct
[ 23.388270] CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000 00004181 00000000 00000000 00000000
[ 23.388292] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 23.388299] CPU: L2 Cache: 128K (64 bytes/line)
[ 23.388305] CPU: After all inits, caps: 27c9bbff 00100000 00000000 00000000 00004181 0000ffcc 00000000 00000000
[ 23.388325] Compat vDSO mapped to ffffe000.
[ 23.388352] Checking ‘hlt’ instruction… OK.
[ 23.404616] SMP alternatives: switching to UP code
[ 23.407039] Freeing SMP alternatives: 11k freed
[ 23.407298] Early unpacking initramfs… done
[ 24.356722] ACPI: Core revision 20070126
[ 24.356927] ACPI: Looking for DSDT in initramfs… error, file /DSDT.aml not found.
[ 24.376973] CPU0: Centaur VIA C7-M Processor 1200MHz stepping 00
[ 24.377025] Total of 1 processors activated (2396.00 BogoMIPS).
[ 24.377370] ENABLING IO-APIC IRQs
[ 24.377582] ..TIMER: vector=0×31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 24.523382] Brought up 1 CPUs
[ 24.523431] CPU0 attaching sched-domain:
[ 24.523437] domain 0: span 01
[ 24.523442] groups: 01
[ 24.523798] net_namespace: 64 bytes
[ 24.523812] Booting paravirtualized kernel on bare hardware
[ 24.524855] Time: 20:43:36 Date: 06/15/08
[ 24.524905] NET: Registered protocol family 16
[ 24.525277] EISA bus registered
[ 24.525288] ACPI: bus type pci registered
[ 24.525791] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 24.525798] PCI: Using configuration type 1
[ 24.525803] Setting up standard PCI resources
[ 24.538206] ACPI: EC: Look up EC in DSDT
[ 24.563098] ACPI: Interpreter enabled
[ 24.563108] ACPI: (supports S0 S3 S4 S5)
[ 24.563144] ACPI: Using IOAPIC for interrupt routing
[ 24.565201] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 24.567457] Error attaching device data
[ 24.581386] ACPI: EC: GPE = 0×11, I/O: command/status = 0×66, data = 0×62
[ 24.581396] ACPI: EC: driver started in interrupt mode
[ 24.581715] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.583830] PCI: Transparent bridge – 0000:00:13.1
[ 24.583890] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 24.584328] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
[ 24.584576] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.NBPG._PRT]
[ 24.584895] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P9._PRT]
[ 24.585126] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0PA._PRT]
[ 24.585362] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.NBP0._PRT]
[ 24.635536] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 24.635778] ACPI: PCI Interrupt Routing Table [_SB_.PCI1._PRT]
[ 24.636945] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 24.637280] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 24.637607] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 24.637933] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 24.638260] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 24.638600] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 24.638939] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 24.639294] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 24.639674] ACPI: Power Resource [APMF] (off)
[ 24.639790] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.639858] pnp: PnP ACPI init
[ 24.639879] ACPI: bus type pnp registered
[ 24.646881] pnp: PnP ACPI: found 14 devices
[ 24.646890] ACPI: ACPI bus type pnp unregistered
[ 24.646899] PnPBIOS: Disabled by ACPI PNP
[ 24.647356] PCI: Using ACPI for IRQ routing
[ 24.647365] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
[ 24.667651] PCI: Device 0000:80:01.0 not found by BIOS
[ 24.683221] NET: Registered protocol family 8
[ 24.683227] NET: Registered protocol family 20
[ 24.683299] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.683309] hpet0: 3 32-bit timers, 14318180 Hz
[ 24.684381] AppArmor: AppArmor Filesystem Enabled
[ 24.687205] Time: tsc clocksource has been installed.
[ 24.687223] Switched to high resolution mode on CPU 0
[ 24.695217] system 00:05: ioport range 0x3e0-0x3e7 has been reserved
[ 24.695226] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 24.695234] system 00:05: ioport range 0×500-0×501 has been reserved
[ 24.695242] system 00:05: ioport range 0×800-0x87f has been reserved
[ 24.695250] system 00:05: ioport range 0×400-0x41f has been reserved
[ 24.695262] system 00:05: iomem range 0xfecc0000-0xfecc0fff could not be reserved
[ 24.695271] system 00:05: iomem range 0xfed02000-0xfed02fff has been reserved
[ 24.695292] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 24.695301] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 24.695321] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 24.695339] system 00:0c: iomem range 0×0-0x9ffff could not be reserved
[ 24.695348] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 24.695356] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 24.695365] system 00:0c: iomem range 0×100000-0x37efffff could not be reserved
[ 24.695374] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 24.736504] PM-Timer running at invalid rate: 134% of normal – aborting.
[ 24.736554] PCI: Bridge: 0000:00:01.0
[ 24.736558] IO window: disabled.
[ 24.736568] MEM window: fbf00000-fcffffff
[ 24.736576] PREFETCH window: d0000000-d7ffffff
[ 24.736586] PCI: Bridge: 0000:00:02.0
[ 24.736592] IO window: d000-dfff
[ 24.736601] MEM window: fd000000-fdffffff
[ 24.736609] PREFETCH window: de000000-dfffffff
[ 24.736618] PCI: Bridge: 0000:00:03.0
[ 24.736624] IO window: e000-efff
[ 24.736633] MEM window: fe000000-fe9fffff
[ 24.736641] PREFETCH window: f8000000-faffffff
[ 24.736652] PCI: Bridge: 0000:00:13.1
[ 24.736656] IO window: disabled.
[ 24.736665] MEM window: fea00000-feafffff
[ 24.736672] PREFETCH window: disabled.
[ 24.736707] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.736737] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[ 24.736749] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.736776] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17
[ 24.736787] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 24.736807] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 24.736840] NET: Registered protocol family 2
[ 24.775255] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.775892] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.777913] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.778970] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.778979] TCP reno registered
[ 24.787408] checking if image is initramfs… it is
[ 26.657970] Freeing initrd memory: 7280k freed
[ 26.658979] audit: initializing netlink socket (disabled)
[ 26.659003] audit(1213562618.236:1): initialized
[ 26.663133] VFS: Disk quotas dquot_6.5.1
[ 26.663296] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.663578] io scheduler noop registered
[ 26.663584] io scheduler anticipatory registered
[ 26.663590] io scheduler deadline registered
[ 26.663617] io scheduler cfq registered (default)
[ 26.663648] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.663737] Boot video device is 0000:01:00.0
[ 26.663979] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.664034] assign_interrupt_mode Found MSI capability
[ 26.664096] Allocate Port Service[0000:00:02.0:pcie00]
[ 26.664178] Allocate Port Service[0000:00:02.0:pcie02]
[ 26.664310] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 26.664371] assign_interrupt_mode Found MSI capability
[ 26.664434] Allocate Port Service[0000:00:03.0:pcie00]
[ 26.664498] Allocate Port Service[0000:00:03.0:pcie02]
[ 26.664920] isapnp: Scanning for PnP cards…
[ 27.019222] isapnp: No Plug & Play device found
[ 27.078808] Real Time Clock Driver v1.12ac
[ 27.079358] hpet_resources: 0xfed00000 is busy
[ 27.079423] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 27.081804] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 27.081976] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 27.082177] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0×60,0×64 irq 1,12
[ 27.086132] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 27.089102] serio: i8042 KBD port at 0×60,0×64 irq 1
[ 27.089113] serio: i8042 AUX0 port at 0×60,0×64 irq 12
[ 27.089120] serio: i8042 AUX1 port at 0×60,0×64 irq 12
[ 27.089127] serio: i8042 AUX2 port at 0×60,0×64 irq 12
[ 27.089134] serio: i8042 AUX3 port at 0×60,0×64 irq 12
[ 27.090118] mice: PS/2 mouse device common for all mice
[ 27.090354] EISA: Probing bus 0 at eisa.0
[ 27.090410] EISA: Detected 0 cards.
[ 27.090417] cpuidle: using governor ladder
[ 27.090422] cpuidle: using governor menu
[ 27.090661] NET: Registered protocol family 1
[ 27.090728] Using IPI No-Shortcut mode
[ 27.090789] registered taskstats version 1
[ 27.091042] Magic number: 12:931:750
[ 27.091057] hash matches device ttyS1
[ 27.091394] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 27.091399] EDD information not available.
[ 27.091837] Freeing unused kernel memory: 368k freed
[ 27.133865] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.725581] fuse init (API version 7.9)
[ 28.784616] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 28.784632] ACPI: Processor [P001] (supports 16 throttling states)
[ 28.789068] ACPI: Thermal Zone [THRM] (86 C)
[ 31.234230] SCSI subsystem initialized
[ 31.291725] usbcore: registered new interface driver usbfs
[ 31.291775] usbcore: registered new interface driver hub
[ 31.315677] usbcore: registered new device driver usb
[ 31.424184] USB Universal Host Controller Interface driver v3.0
[ 31.424344] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 31.424365] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 31.425024] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 31.425070] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000b800
[ 31.425345] usb usb1: configuration #1 chosen from 1 choice
[ 31.425394] hub 1-0:1.0: USB hub found
[ 31.425405] hub 1-0:1.0: 2 ports detected
[ 31.521327] libata version 3.00 loaded.
[ 31.527701] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
[ 31.527725] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 31.527775] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 2
[ 31.527816] uhci_hcd 0000:00:10.2: irq 19, io base 0x0000b880
[ 31.528049] usb usb2: configuration #1 chosen from 1 choice
[ 31.528097] hub 2-0:1.0: USB hub found
[ 31.528109] hub 2-0:1.0: 2 ports detected
[ 31.631642] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
[ 31.631668] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 31.631718] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
[ 31.631759] uhci_hcd 0000:00:10.3: irq 20, io base 0x0000bc00
[ 31.631989] usb usb3: configuration #1 chosen from 1 choice
[ 31.632040] hub 3-0:1.0: USB hub found
[ 31.632051] hub 3-0:1.0: 2 ports detected
[ 31.735778] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19
[ 31.735808] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 31.735865] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 31.735924] ehci_hcd 0000:00:10.4: debug port 1
[ 31.735941] ehci_hcd 0000:00:10.4: irq 19, io mem 0xfbeffc00
[ 31.747374] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.747623] usb usb4: configuration #1 chosen from 1 choice
[ 31.747674] hub 4-0:1.0: USB hub found
[ 31.747687] hub 4-0:1.0: 8 ports detected
[ 31.851547] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 21
[ 31.851569] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 31.911322] WARNING: at /build/buildd/linux-2.6.24/drivers/ssb/main.c:883 ssb_tmslow_reject_bitmask()
[ 31.911337] Pid: 1541, comm: modprobe Not tainted 2.6.24-18-generic #1
[ 31.911355] [] ssb_tmslow_reject_bitmask+0x4b/0×60 [ssb]
[ 31.911381] [] ssb_device_is_enabled+0×11/0×40 [ssb]
[ 31.911400] [] ssb_pcicore_init+0×19/0×60 [ssb]
[ 31.911418] [] ssb_attach_queued_buses+0xd3/0×260 [ssb]
[ 31.911437] [] ssb_pci_xtal+0x17f/0×230 [ssb]
[ 31.911458] [] ssb_bus_register+0×156/0x1d0 [ssb]
[ 31.911475] [] ssb_pci_get_invariants+0×0/0x2c0 [ssb]
[ 31.911506] [] ssb_bus_pcibus_register+0x2a/0×60 [ssb]
[ 31.911523] [] pci_set_master+0×54/0×60
[ 31.911538] [] ssb_pcihost_probe+0x6c/0xb0 [ssb]
[ 31.911556] [] pci_device_probe+0×56/0×80
[ 31.911570] [] driver_probe_device+0×88/0×190
[ 31.911589] [] __driver_attach+0x9e/0xa0
[ 31.911601] [] bus_for_each_dev+0x3b/0×60
[ 31.911614] [] driver_attach+0×16/0×20
[ 31.911624] [] __driver_attach+0×0/0xa0
[ 31.911634] [] bus_add_driver+0x8a/0x1e0
[ 31.911648] [] __pci_register_driver+0×56/0×90
[ 31.911659] [] ssb_modinit+0x4a/0×80 [ssb]
[ 31.911673] [] blocking_notifier_call_chain+0×17/0×20
[ 31.911690] [] sys_init_module+0×126/0x19c0
[ 31.911723] [] bus_register+0×0/0×230
[ 31.911739] [] syscall_call+0×7/0xb
[ 31.911756] =======================
[ 31.911866] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 31.912118] sata_via 0000:00:0f.0: version 2.3
[ 31.912167] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19
[ 31.912237] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 31.925764] scsi0 : sata_via
[ 31.941566] scsi1 : sata_via
[ 31.944692] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 31.944701] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 32.147128] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 32.311289] ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC32P, max UDMA/100
[ 32.311301] ata1.00: 312581808 sectors, multi 16: LBA48
[ 32.327331] ata1.00: configured for UDMA/100
[ 32.530993] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 32.541984] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[ 32.543020] tg3.c:v3.86 (November 9, 2007)
[ 32.543067] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 32.641735] eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:1f:29:85:51:33
[ 32.641755] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 32.641763] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 33.687355] Driver ‘sd’ needs updating – please use bus_type methods
[ 33.687517] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 33.687542] sd 0:0:0:0: [sda] Write Protect is off
[ 33.687549] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.687582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 33.687670] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 33.687690] sd 0:0:0:0: [sda] Write Protect is off
[ 33.687696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.687726] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 33.687736] sda: sda1 sda2
[ 33.703276] sd 0:0:0:0: [sda] Attached SCSI disk
[ 33.719673] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.918178] Clocksource tsc unstable (delta = -364370013 ns)
[ 33.922158] Time: hpet clocksource has been installed.
[ 34.608131] loop: module loaded
[ 34.669221] kjournald starting. Commit interval 5 seconds
[ 34.669252] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.270099] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 45.333471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 47.363963] input: Power Button (FF) as /devices/virtual/input/input2
[ 47.375608] ACPI: Power Button (FF) [PWRF]
[ 47.375893] input: Lid Switch as /devices/virtual/input/input3
[ 47.376066] ACPI: Lid Switch [LID]
[ 47.376195] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 47.387577] ACPI: Sleep Button (CM) [SLPB]
[ 47.387770] input: Power Button (CM) as /devices/virtual/input/input5
[ 47.399593] ACPI: Power Button (CM) [PWRB]
[ 49.666504] ACPI: WMI-Acer: Mapper loaded
[ 51.414893] ACPI: AC Adapter [AC0] (off-line)
[ 52.331478] ACPI: Battery Slot [BAT1] (battery present)
[ 52.489086] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/LNXVIDEO:00/input/input6
[ 52.500483] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 55.159145] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 59.708753] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 23
[ 59.708814] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 59.736795] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
[ 59.774824] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 63.606741] lp: driver loaded but no devices found
[ 64.206882] EXT3 FS on loop0, internal journal
[ 86.199183] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 87.157812] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 88.158715] No dock devices found.
[ 90.122100] apm: BIOS version 1.2 Flags 0×03 (Driver version 1.16ac)
[ 90.122113] apm: overridden by ACPI.
[ 90.360709] ppdev: user-space parallel port driver
[ 90.457257] audit(1213573484.864:2): type=1503 operation=”inode_permission” requested_mask=”a::” denied_mask=”a::” name=”/dev/tty” pid=4813 profile=”/usr/sbin/cupsd” namespace=”default”
[ 92.500132] Bluetooth: Core ver 2.11
[ 92.501440] NET: Registered protocol family 31
[ 92.501451] Bluetooth: HCI device and connection manager initialized
[ 92.501460] Bluetooth: HCI socket layer initialized
[ 92.767332] Bluetooth: L2CAP ver 2.9
[ 92.767343] Bluetooth: L2CAP socket layer initialized
[ 92.826695] Bluetooth: RFCOMM socket layer initialized
[ 92.826727] Bluetooth: RFCOMM TTY layer initialized
[ 92.826732] Bluetooth: RFCOMM ver 1.8
[ 101.894709] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 178.104283] NET: Registered protocol family 10
[ 178.106028] lo: Disabled Privacy Extensions
[ 178.108895] ADDRCONF(NETDEV_UP): eth0: link is not ready


• Publicado por Augusto Campos em 2008-06-16

Comentários dos leitores

Os comentários são responsabilidade de seus autores, e não são analisados ou aprovados pelo BR-Linux. Leia os Termos de uso do BR-Linux.

    Ednei_Pacheco (usuário não registrado) em 16/06/2008 às 10:59 pm

    Roda um SuperPI nele e posta o tempo gasto no processamento! &;-D

    rafa (usuário não registrado) em 16/06/2008 às 11:08 pm

    boa.

Este post é antigo (2008-06-16) e foi arquivado. O envio de novos comentários a este post já expirou.