Ih cara vai ser linxando pela “Ku Klux Klan” Anti-Ubuntu aqui no Br-Linux.

[]‘s

APN = Access Point Name

Obrigado pelo tutorial!
Mas estou com um problema (desculpe-me pelo tamanho do post. Ia postar num forum, mas como o assunto apareceu): comprei um modem da Claro 3g, mas o hardware que me foi vendido foi o SonyEricsson MD300 (http://www.letsgodigital.org/en/17426/sony-ericsson-md300/) e quando conecto, é reconhecido apenas como unidade de storage (em /dev/sdb1).

O link para o /dev/ttyUSB0 nao é reconhecido como modem USB (o proprio wvdial diz (usando o wvdial.conf do artigo):
WvDial: WvDial: Internet dialer version 1.56
WvDial: Cannot open /dev/ttyUSB0: No such file or directory
). Alias, ele nem existe!

Por favor, alguem está com esse problema?

Uso Ubuntu 7.10.
Quando coloco o device na USB, os comandos retornam:

#lsusb:
Bus 004 Device 002: ID 0fce:d0cf Sony Ericsson Mobile Communications AB

#dmesg:
[ 87.972000] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 88.192000] usb 4-2: configuration #1 chosen from 3 choices
[ 88.328000] usbcore: registered new interface driver libusual
[ 88.432000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 88.432000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 88.452000] Initializing USB Mass Storage driver…
[ 88.452000] scsi5 : SCSI emulation for USB Mass Storage devices
[ 88.456000] usb-storage: device found at 2
[ 88.456000] usb-storage: waiting for device to settle before scanning
[ 88.456000] usbcore: registered new interface driver usb-storage
[ 88.456000] USB Mass Storage support registered.
[ 93.456000] usb-storage: device scan complete
[ 93.460000] scsi 5:0:0:0: Direct-Access SEMC MMC Flash Card 0 PQ: 0 ANSI: 0
[ 93.464000] sd 5:0:0:0: [sdb] 348161 512-byte hardware sectors (178 MB)
[ 93.472000] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 93.472000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 93.480000] sd 5:0:0:0: [sdb] 348161 512-byte hardware sectors (178 MB)
[ 93.488000] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 93.488000] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 93.488000] sdb: sdb1
[ 93.496000] sdb: p1 exceeds device capacity
[ 93.500000] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 93.500000] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 93.868000] attempt to access beyond end of device
[ 93.868000] sdb: rw=0, want=348168, limit=348161
[ 93.868000] Buffer I/O error on device sdb1, logical block 348160
[ 93.868000] attempt to access beyond end of device
[ 93.868000] sdb: rw=0, want=348168, limit=348161
[ 93.868000] Buffer I/O error on device sdb1, logical block 348160
[ 93.872000] attempt to access beyond end of device
[ 93.872000] sdb: rw=0, want=348162, limit=348161
[ 93.872000] Buffer I/O error on device sdb1, logical block 348154
… mais pra frente muda para:
[ 93.924000] attempt to access beyond end of device
[ 93.924000] sdb: rw=0, want=348166, limit=348161
[ 93.924000] attempt to access beyond end of device
[ 93.924000] sdb: rw=0, want=348167, limit=348161
[ 93.924000] attempt to access beyond end of device
[ 93.924000] sdb: rw=0, want=348168, limit=348161
[ 93.924000] attempt to access beyond end of device

#lsmod | grep usb:
usb_storage 73024 1
ide_core 116804 1 usb_storage
libusual 18448 1 usb_storage
usbserial 34920 0
scsi_mod 147084 6 usb_storage,sbp2,sr_mod,sg,sd_mod,libata
usbcore 138632 8 usb_storage,libusual,ndiswrapper,usbserial,uvcvideo,ehci_hcd,uhci_hcd

No /dev nao é criado o ‘ttyUSB0′ e nem o ‘modem’.

Qualquer outra informacao posso enviar.

Muito obrigado mesmo!! (até agora, só vi essa porcariazinha de modem funcionar so no windows)
Mais uma vez, desculpe-me pelo tamanho do post!
Obrigado!
a2gs

Como ficou sabendo deste “ASN” novo, alias não seria APN?